What Type of Thinset to Use When Installing Marble Tile
The successful installation of marble tiles requires a surface that is strong, stable and horizontal enough not to interfere with the placement of the tiles.It takes time and effort to make this surface, but no matter how perfect the surface is, it is equally important to choose the right adhesive.For marble tiles, the adhesive chosen is usually cementbased thinset. It is well combined with concrete, backboard or wood underground while allowing the tiles to move along with the surface below.But when it comes to thinset, the installer faces the option of which thinset to use, fastSet or fixed, depending entirely on the type of marble installed, choose the right one.Check the thickness and color of the tile. Most marble tiles are at 3/8 and-inch thick.Those tiles in the thinner half range curl at the edges when cured due to moisture absorption.Determine if your tile is a thinner or thicker half of the range to determine the appropriate thickness. Choose a thin one based on the thickness of the tile.Use a quick-Set the thinset adhesive for Thinner tiles in order to solidify the tiles in place before they have time to absorb moisture from the adhesive and start curling.For tiles with a thicker half of the range, use a common mixture of thin materials. Check the color of the tile before purchasing the thin sleeve.Buy lighterLighter color thin sleeveColor tiles, because the dark thin may be displayed, change the apparent color after the tiles are placed.Use liquid latex additives instead of water to mix the material selected for the tile. This additive helps to glue and adds flexibility to the backing of the tile to prevent cracking due to the movement of the floor.When installing green, black and black chocolate brown tiles, replace the thin tiles with a 100% epoxy adhesive.Even if there is fastThey curl too fast to set up the thin sleeves correctly.