We sell the problems we solve

White Marks After Tile Cleaning

by:Shihui     2020-01-06
When you try to scrub the tiles and make them damp and sparkling, you may be surprised to see white film, stripes or spots appear when the water dries.These traces may be caused by many factors, but most of them are easy to clean.Quick handling of marks as some marks are signs of grinding salt that may scratch the tiles.If your tile is new, the grouting may not be cleaned during the installation.When you wipe the tiles to remove the remaining mud, you must rinse the sponge frequently.If not, you just sprinkle the grout residue on the new tile.You can\'t see this when the tile is wet, but when the tile is dry, a white film appears on the tile you just cleaned.Hard water contains elements such as calcium and lime, leaving white spots on the floor after cleaning.In addition, the spilled salt or salt tracked on the shoes may not be easy to find on the floor.When you clean the floor with salt on it but not flush the floor well, dissolved salt creates white lines and spots on the tiles.The salt and hidden minerals extracted from hard water can be abrasive, so attack them quickly before there is no time to scrape the tiles.Wipe the floor with a mixture of 1 vinegar and 4 water to remove white spots and film.Using a floor cleaner that is not designed for a tile can cause soap slag to pile up on the tile, especially if you do not wipe the floor with clear water after using the detergent.This accumulation can occur as a film on several tiles or white spots scattered around the floor.Pour vinegar or laundry detergent into the soap slag area and let it sit for a few minutes.Clean and rinse with clear water.For harder soap slag stains, remove them using trisodium phosphate.Stone Bricks are usually porous and the surface is uneven, and stains remain the same even after regular cleaning.The best way to deal with stone tile stains is to apply plasters such as a mixture of hydrogen peroxide and cod, or chalk, or paper towels soaked in ammonia.Cover these with plastic and tie the plastic to the floor, then leave the plaster in place until it dries.This helps remove stains from the stone, and you can avoid scrubbing the area with a grinding cleaner that might scratch the tile.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...